8. Feeding clearance
The adjusting screw of the feeding clearance on the top cover
has already been set to the best position in the factory. When the
counting error messages frequently occur (I.e. Double notes/chain
notes), it is necessary to readjust this adjusting screw.
When the machine cannot count the banknotes smoothly or
displays "Slant notes" frequently, turn the screw clockwise
to make the clearance larger,
When the machine displays the "Double notes" or
"Chained notes" error frequently, turn the screw counter-
clockwise to make the clearance smaller.
CAUTION
The adjusting screw is very sensitive, make only minor
adjustment.
DoCash DC-45V
20
www.docash.de
To Next Page
Loading...
