6. Operation and Function Introduction
6.1 Power Supply
◆ DC Power: Connect the power adapter to a 110V or 220V out-
let, then connect the terminal to machine’s DC12V input socket.
◆ Lithium Battery (optional): When the battery was fully charged,
the machine can work without power adapter.
6.2 Turn on/off the machine
Press power button for 2 seconds, machine will start self testing. If the
test is successful, display will show banknote exit direction, signs
with three beeps, which means the equipment is ready to check the bills.
Press power button for 3 seconds to turn off machine
Figure 1
9
www.docash.de
To Next Page
Loading...