8
GETTING START
1. Insert a memory card (sold separately)
• Please insert a SDHC card with class 6 or above, into the slot located on the
bottom of the unit.
• Be sure to format the SD card before the initial use.
* This Camera supports to 32GB SD Card. Please contact with your local deal for purchase
information.
2. Turning the power on / off
• Press [ ] button to turn the unit on.
To turn the unit off, press the [ ] button again.
* After the unit has been installed in your car, connect the car power adapter and start the
engine; the unit will automatically turn on.
To Next Page
Loading...
