DOD GUNSLINGER - DOD Gunslinger Controls and Jacks; Gain Control; Level Control; Low Frequency Control

1 2
3 4
5
6
8
7
1. GAIN - adjusts the amount of distortion gain.
2. LEVEL - adjusts the overall output level of the distortion eect.
3. LOW - adjusts the amount of low frequencies in the distortion signal.
4. HIGH - adjusts the amount of high frequencies in the distortion signal.
5. INPUT - connect your instrument here.
6. FOOTSWITCH - turns the eect on and o.
7. LED - turns on when the eect is enabled.
8. OUTPUT - connect to the next pedal’s input or to the input of your amplier.