Basic Camera Operation
Everyday Operation
Your dash camera will automatically turn on and start recording when it starts receiving power. By
default, the camera will record over the oldest videos when the memory card is full (loop recording).
Continuously Powered Electrical Outlet
If your camera is continuously powered, the camera will not automatically shut down when your
vehicle is turned off. To turn off your camera, the USB cable can be pulled out or the power button
can be pressed (see the below section).
The camera may be left on while parked to capture video while you are away.
“Continuously-Powered-Electrical-Outlet” operation will slowly drain your vehicle’s
battery and may eventually prevent your car from starting.
Manually Turning On / Off Your Camera
To Next Page
Loading...