Camera Settings
Video Recording: First Settings Page
Accessed by pressing [ ] once.
Parking mode (Default: off)
When function is enabled, dashboard camera will automatically switch to parking mode if vehicle is stationary for
over 10 minutes.
1. Automatically records a 15-second video when motion detected within view range of camera.
2. Automatically records and locks a 1-minute video when excessive force of impact is detected by G-sensor.
3. Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or longer.
Note:
Parking Mode requires consistent power supply via vehicle battery. (Power cord with low-voltage protection is
recommended to prevent battery drainage.)
Please ensure to enable G-sensor function in setting menu before switch to Parking Mode. (G-sensor
sensitivity Default: Medium)
Plate Stamp
Imprints a customized set of 8 digits to the recorded
video. Add license plates or other identifying features
to watermark your video.
Password Settings
Set a password lock which will prevent files from being
deleted or the settings changed on the device.
Note: This does not prevent other users from
extracting the memory card or changing the files. This
Time-Lapse
The time-lapse function is used to create a sped-up
video. When set, the camera will record one frame
every 200ms (milliseconds)/500 ms/1 second/5
To Next Page
Loading...