SHIFT LEVER OVERRIDE
• If a malfunction occurs and the shift lever cannot be moved out of the PARK
position, you can use the following procedure to temporarily move the shift lever.
• Have your vehicle inspected by your local authorized dealer immediately if the shift
lever override has been used.
Column Shifter
•
Tilt the steering wheel to the full up
position and firmly set the parking brake.
•
Turn the Key Fob to the ACC or ON/RUN
position without starting the engine.
• Press and maintain firm pressure on
the brake pedal.
• Using a screwdriver, press and hold the
override tab through the access port
(ringed circle) on the bottom of the
steering column.
• Move the shift lever into the NEUTRAL
position and start the vehicle.
• Release the parking brake.
Center Console Shifter
• Firmly set the parking brake.
•
Turn the Key Fob to the ACC or ON/RUN
position without starting the engine.
• Press and maintain firm pressure on
the brake pedal.
• Using a screwdriver, press and hold the
override tab through the access port on
the center console.
• Move the shift lever into the NEUTRAL
position and start the vehicle.
• Release the parking brake.
WHAT TO DO IN EMERGENCIES
124
To Next Page
Loading...
