Uconnect™ 5.0
Clock Setting
1. Press the More hard-key on the right side of the display, next press the Time
soft-key and then press the Set soft-key. OR Press the Settings hard-key on the
right side of the display, then press the Clock soft-key. The Time setting screen is
displayed and the clock can be adjusted as described in the following procedure.
NOTE:
In the Clock Setting Menu you can also select Display Clock. Display Clock turns
the clock display in the status bar on or off.
2.
Touch the Up or Down arrows to adjust the hours or minutes, next select the AM or PM
soft-key. You can also select 12hr or 24hr format by touching the desires soft-key.
3. Once the time is set press the “Done” soft-key to exit the time screen.
Equalizer, Balance and Fade
1. Press the SETTINGS hard-key on the right side of the unit.
2. Then scroll down and press the Audio soft-key to get to the Audio menu.
3. The Audio Menu shows the following options for you to customize your audio
settings.
ELECTRONICS
48
To Next Page
Loading...
