Voice Command Tips
• Use longer names that are less easily mistaken for others. For example, say “Call
John Doe” instead of “Call John”.
• You can “chain” commands together for faster results. Say “Call John Doe,
mobile”, for example.
• You can interrupt while the system is talking to you, enabling you to enter your
response without waiting. Just press the Voice Command
button on the
steering wheel to say your command.
Changing The Volume
• Start a dialogue by pressing the Phone button
, then say a command for
example - "Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable
level while the Uconnect™ system is speaking. Please note the volume setting for
Uconnect™ is different than the audio system.
NOTE:
To access help, press the Uconnect™ Phone
button on the steering wheel and
say "help." Touch the display or push either
or button and say "cancel"
to cancel the help session.
SMS (Text Messaging)
• Uconnect™ Phone can read or send new text messages on your mobile phone.
• Your mobile phone must support SMS over Bluetooth
®
in order to use this feature.
If the Uconnect™ Phone determines your phone is not compatible with SMS
messaging over Bluetooth
®
the “Messaging” button will be greyed out and the
feature will not be available for use.
NOTE:
• For mobile phone compatibility and pairing instructions, please visit
www.UconnectPhone.com
• Uconnect™ Phone SMS is only available when the vehicle is not moving.
• Any voice commanded system should be used only in safe driving conditions
following applicable laws regarding phone use. All attention should be kept on the
roadway ahead. Failure to do so may result in a collision causing you and others to
be severely injured or killed.
• In an emergency, to use Uconnect™ Phone, your mobile phone must be:
• turned on,
• paired to Uconnect™ Phone,
• and have network coverage.
ELECTRONICS
78
To Next Page
Loading...
