Dodge CHALLENGER 2022 - Page 33

MULTIMEDIA 31
 With a USB jump drive installed, press the
USB button to save to the jump drive.
 Press the Uconnect button to save the current
timer data to the Owner’s web page.
NOTE:
The Uconnect option will be grayed out or missing
if the vehicle does not have a valid Uconnect
account associated with it.
 Press the Cancel button to return to the
Timers page.
The tabs on the Timers page contain the timers
listed below:
 Reaction Time
Measures the driver's reaction time for
launching the vehicle against a simulated drag
strip timing light (behavior modeled after
500 Sportsman Tree) displayed in the instru-
ment cluster display.
NOTE:
Drag timers (RT, 60 ft [20 m], 330 ft [100 m],
1/8 mile [200 m], 1000 ft [300 m], and
1/4 mile [400 m]).
NOTE:
Accel & Braking timers (0-60 mph (0-100 km/h),
0-100 mph (0-160 km/h), Brake from mph (km/h),
and Brake Distance ft (meters).
 0-60 mph (0-100 km/h)
Displays the time it takes for the vehicle to go
from 0 to 60 mph (0 to 100 km/h).
 0-100 mph (0-160 km/h)
Displays the time it takes for the vehicle to go
from 0 to 100 mph (0 to 160 km/h).
 60 ft (20 m) ET
Displays the time it takes the vehicle to go
60 feet (20 m).
 330 ft (100 m) ET
Displays the time it takes the vehicle to go
330 feet (100 m).
 ⅛ Mile (200 m) ET
Displays the time it takes for the vehicle to go
⅛ mile (200 m).
 ⅛ Mile (200 m) mph
Displays the vehicle speed at the time ⅛ mile
(200 m) was reached.
 1000 ft (300 m) ET
Displays the time it takes the vehicle to go
1000 ft (300 m).
 ¼ Mile (400 m) ET
Displays the time it takes for the vehicle to go
¼ mile (400 m).
 ¼ Mile (400 m) mph
Displays the speed the vehicle was at when
¼ mile (400 m) was reached.
 Brake Distance ft (meters)
Displays the distance it takes the vehicle to
make a complete stop.
NOTE:
The distance measurement will be aborted if the
brake pedal is released or the parking brake is
engaged, before the vehicle comes to a complete
stop.
 Brake from mph (km/h)
Displays the speed the vehicle is traveling when
the brake pedal is pressed.
NOTE:
Brake Distance and Speed timers only displays
"ready" when vehicle is traveling at greater than
30 mph (48 km/h).
5
22_LALD_S_SU_EN_USC_t.book Page 31