MULTIMEDIA 35
The following options can be selected:
Pressing the STOP button will freeze the graph.
Selecting “Play” will clear the graph and restart
the process over.
Press the + or – button to change the history of
the graph. The selectable options are “30”,
“60”, “90”, and “120” seconds. The graph will
expand or constrict depending on the setting
selected.
Select the Gear display setting to turn the graph
gear markers on and off for Automatic Transmis-
sion vehicles only.
NOTE:
The Gear: On/Off feature will only display if your
vehicle is equipped with an Automatic Trans-
mission.
DODGE DRIVE MODES — IF EQUIPPED
PERFORMANCE CONTROL —
I
F EQUIPPED
Your vehicle may be equipped with a Performance
Control feature which allows for coordinating the
operation of various vehicle systems depending
upon the type of driving behavior desired. The
Performance Control feature is controlled through
the Uconnect system and may be accessed by
performing any of the following:
Selecting “Performance Control” from the Apps
menu.
Selecting “Performance Control” from within the
Performance Pages menu.
Pressing the STP (Super Track Pack) button.
You will be able to enable, disable, and customize
the functionality of the Launch Control and
Performance Control Set-Up features within
Performance Control.
Descriptions of these features are provided below.
To access information about the functionality of
these features through the Uconnect system,
press the Info button on the touchscreen.
5
22_LALD_S_SU_EN_USC_t.book Page 35
To Next Page
Loading...
