EasyManua.ls Logo

Dodge Challenger SRT - Track Usage Guidelines and Procedures; Pre-Run Checks for Drag Strip; Drag Mode Operations and Controls

Dodge Challenger SRT
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Apply Filter Oil:
Using Mopar Performance Air Filter Ser-
vice Kit P5153376 spray oil evenly along
the crown of each filter pleat holding the
nozzle about 3” away.
With one good coat of oil let it wick
(saturate) for about 20 minutes, then if
required, touch up any light areas on
either side of the air filter until there is a
uniform red color on all areas.
Vehicle Storage
Do not allow tires to be stored in a room less
than 15° F (-9° C).
NOTE:
If vehicle is stored with tires, lift vehicle or
pump tires up to max sidewall pressure. Please
note that tire pressure increases as the ambient
temperature increases.
TRACK MAINTENANCE
At Track Maintenance
1. Check engine air filter . (refer to “Mainte-
nance And Storage”)
2. Exterior rubber cleanup.
3. Tire pressure, brakes (visual inspection of
rotors and pads), battery voltage, lug nut
torques.
4. Driveline checks.
DEMON CRATE IF EQUIPPED
From street to strip, the legend of high-powered
Dodge muscle cars of the 1960s and ‘70s was
forged on both city streets, as well as the drag
strip. Now, the Dodge Challenger SR T Demon is
primed to take that legacy to new levels of
legendary performance. This is the first
purpose-built vehicle that can drive on the
street to the track and excel on the drag strip.
For the first time ever, Dodge offers a fully OEM
developed bolt on drag strip performance pack-
age as an aftermarket option for your Dodge
Challenger SR T Demon. The Demon Crate con-
tent improves performance with a selection of
Demon Crate
23
FEATURES OVERVIEW

Related product manuals