2. Separating RKE Key Fob halves may require screw
removal – if equipped, and gently prying the two
halves of the RKE Key Fob apart. Make sure not to
damage the seal during removal.
3. Remove the battery by turning the back cover over
(battery facing downward) and tapping it lightly on a
solid surface such as a table or similar, then replace the
battery. When replacing the battery, match the + sign
on the battery to the + sign on the inside of the battery
clip, located on the back cover. Avoid touching the
Separating RKE Key Fob Case
Separating RKE Key Fob Case
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
