Using The EVIC Menu
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
• Push and release the UP
arrow button to scroll
upward through the main menu to “Vehicle Info”.
• Push and release the RIGHT
arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT
arrow button for one
second to reset Oil Life to 100%.
• Push and release the UP
arrow button to exit the
EVIC screen.
Vehicles Not Equipped With Passive Entry
• Turn the ignition switch to the ON/RUN position (do
not start the engine).
• Push and release the UP
arrow button to scroll
downward through the main menu to “Vehicle
Info”.
• Push and release the RIGHT
arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT
arrow button for one
second to reset Oil Life to 100%.
• Push and release the UP
arrow button to exit the
EVIC screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 349
To Next Page
Loading...
Need help?
General
