Dodge DART 2016 User Manual

3. Turn the ignition switch to the OFF/LOCK position.
Using The DID Menu
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
• Push and release the UP
or DOWN arrow
button to scroll through the main menu to “Vehicle
Info.”
• Push and release the RIGHT arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT arrow button for one
second to reset the gauge and numeric display to
100% for ”Oil Life.”
• Push and release the UP or DOWN arrow
button to exit the DID screen.
Vehicles Not Equipped With Passive Entry
• Turn the ignition switch to the ON/RUN position (do
not start the engine).
• Push and release the UP
or DOWN arrow
button to scroll through the main menu to “Vehicle
Info.”
• Push and release the RIGHT arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT arrow button for one
second to reset the gauge and numeric display to
100% for ”Oil Life.”
• Push and release the UP or DOWN arrow
button to exit the DID screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 365

Dodge DART 2016 Specifications

General

Brand	Dodge
Model	DART 2016
Category	Automobile
Language	English