NOTE: In certain cold conditions, ice may prevent the
fuel door from opening. If this occurs, lightly push on the
fuel door around the entire perimeter to break the ice
buildup and re-open the door.
4. When the fuel nozzle “clicks” or shuts off, the fuel
tank is full.
5. After you have stopped pumping fuel, remove the fuel
filler nozzle and replace the fuel filler cap.
6. Tighten the gas cap about one-quarter turn until you
hear one click. This is an indication that the cap is
properly tightened.
7. To close the fuel filler door, push the center-rear edge
of the fuel filler door and then release. The fuel door
will close.
Fuel Filler Door And Fuel Filler Cap Tether Hook
1— Tether Hook
524 STARTING AND OPERATING
To Next Page
Loading...
Need help?
General
