EasyManua.ls Logo

Dodge Durango 2011 - Parksense Rear Park Assist

Dodge Durango 2011
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rear Temperature Controls
Rear second row occupants can only adjust the rear ATC control when the REAR
LOCK button is turned off.
The Rear ATC System is located in the headliner, near the center of the vehicle.
P ARKSENSE
®
REAR P ARK ASSIST
The four ParkSense
®
sensors, located in the rear fascia/bumper, monitor the area
behind the vehicle that is within the sensors’ field of view.
When an object is detected within two meters behind the rear bumper while the
vehicle is in REVERSE, a warning will display in the Electronic Vehicle Information
Center (EVIC) and a chime will sound (when Sound and Display is selected from
the Customer Programmable Features section of the EVIC). As the vehicle moves
closer to the object, the chime rate will change from slow, to fast, to continuous.
Cleaning the ParkSense® Sensors
If “CLEAN PARK ASSIST SENSORS” appears in the Electronic Vehicle Information
Center (EVIC), clean the ParkSense
®
sensors with water, car wash soap and a soft
cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors.
Otherwise, you could damage the sensors.
NOTE: When the Instrument Cluster reads either Clean Sensor or Blinded, please clean
off the bumper sensors to see if the condition is corrected.
OPERATING YOUR VEHICLE
30

Table of Contents

Other manuals for Dodge Durango 2011

Related product manuals