142 MULTIMEDIA
Units
Clock/Clock & Date
Hill Start Assist This setting will turn the Hill Start Assist system on or off.
When the Units button is pressed on the touchscreen, the system displays the different measurement options. The selected unit of measurement will display in the instrument
cluster display and Navigation system (if equipped). The available settings are:
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name Description
US This setting will change the unit of measurement on the display to US.
Metric This setting will change the unit of measurement on the display to Metric.
Custom
This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km), “Fuel
Consumption” (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar),
and “Temperature” (°C or °F) units of measurement independently.
Setting Name Description
When the Clock/Clock & Date button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name Description
Sync With GPS Time
This setting will sync the time to the GPS receiver in the system. The system will control
the time via the GPS location.
22_WD_OM_EN_USC_t.book Page 142
To Next Page
Loading...
