36 GETTING TO KNOW YOUR VEHICLE
Center Head Restraint Release Button
NOTE:
For proper routing of a Child Seat Tether, see Ú page 168.
Power Folding Third Row Head Restraints
For improved visibility when in REVERSE, the third row
head restraints can be folded using the Uconnect system.
Press the Controls button located on the bottom of the
Uconnect display.
Press the Headrest Fold button to power fold
the third row head restraints.
NOTE:
The head restraints can only be folded
downward using the Headrest Fold button. The head
restraints must be raised manually when occupying the
third row.
Do not fold if there are passengers seated in the third
row seats.
UCONNECT VOICE RECOGNITION
INTRODUCING VOICE RECOGNITION
Start using Uconnect Voice Recognition (VR) with these
helpful quick tips. It provides the key Voice Commands
and tips you need to know to control your Uconnect
system.
Voice Recognition
WARNING!
A loose head restraint thrown forward in a collision or
hard stop could cause serious injury or death to occu-
pants of the vehicle. Always securely stow removed
head restraints in a location outside the occupant
compartment.
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow the
preceding reinstallation instructions prior to oper-
ating the vehicle or occupying a seat.
22_WD_OM_EN_USC_t.book Page 36
To Next Page
Loading...
