70 GETTING TO KNOW YOUR VEHICLE
5. Slide the crossbar into the deploy position by moving
it towards the matching letter in the side rail. Be sure
the crossbar is fully deployed with the crossbar
pushed as far into the slot as possible. Once the
crossbar is in place, tighten both thumb screws
completely.
Installing Crossbars
6. Deploy and tighten the second crossbar to complete
the deployment of the crossbars.
Deployed Crossbars
STOWING THE CROSSBARS
1. Starting with one crossbar, completely loosen the
thumb screws at both ends. Slide the crossbar away
from the matching letter to remove it from the
deployed position. Repeat with the other crossbar.
2. Starting with the one crossbar, bend up the pivot
supports at each end.
Crossbar Pivot
3. Position the crossbar along the correct side rail. Make
sure the letters on the crossbar align with the
matching letters on the side rail.
Stowing Crossbars
CAUTION!
Use care when removing and handling the crossbars to
prevent damage to the vehicle.
22_WD_OM_EN_USC_t.book Page 70
To Next Page
Loading...
