SAFETY 195
2. To access the top tether strap anchorages behind the
rear seat, pull the carpeted floor panel away from the
seat back, this will expose the top tether strap
anchorages.
Pulling Down The Carpet Floor Panel To Access Top Tether
Strap Anchorage (Five Passenger)
Pulling Down The Carpet Floor Panel To Access Top Tether
Strap Anchorage (3rd Row Bench)
Third Row Top Tether Strap Anchorage (Located On Seatback)
3. Route the tether strap to provide the most direct path
for the strap between the anchor and the child seat.
If your vehicle is equipped with adjustable rear head
restraints, raise the head restraint, and where
possible, route the tether strap under the head
restraint and between the two posts. If not possible,
lower the head restraint and pass the tether strap
around the outboard side of the head restraint.
4. For the center seating position, route the tether strap
over the seatback and headrest then attach the hook
to the tether anchor located on the back of the seat.
5. Attach the tether strap hook of the child restraint to
the top tether anchorage as shown in the diagram.
Bench Seat Top Tether Strap Mounting (5 Passenger Seating)
Second Row Bench Seat Top Tether Strap Mounting
(7 Passenger Seating)
6
22_WD_OM_EN_USC_t.book Page 195
To Next Page
Loading...
