204 IN CASE OF EMERGENCY
Winch Location
Wrench Rotation
4. Slide the tire out from under the vehicle and rotate it
vertically behind the rear fascia/bumper.
Spare Tire
NOTE:
Depending on the vehicle trim, the vehicle may come
equipped with both, a metal retainer and plastic plate or a
metal retainer only when removing the spare
Ú page 253.
5. Pull the metal stamping toward you to release it from
the plastic plate (if equipped).
Spare Tire Retainer
6. Slide the metal stamping up the steel extension tube
and winch cable. Rotate the metal stamping and
push it through the hole in the plastic plate (if
applicable) and wheel.
Sleeve And Cable
22_WD_OM_EN_USC_t.book Page 204
To Next Page
Loading...
