FLUIDS, LUBRICANTS, AND GENUINE PARTS
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS.90032.
Engine Oil
We recommend you use a full synthetic 0W-40 engine oil such as MOPAR or Pennzoil Ultra or equivalent engine oil.
Engine Oil Filter We recommend you use MOPAR Engine Oil Filters.
Spark Plugs We recommend you use MOPAR Spark Plugs.
Fuel Selection We recommend you use Research Octane Number (RON) of 98 or higher, 0-10% Ethanol.
CAUTION!
• Mixing of engine coolant (antifreeze) other
than specified OrganicAdditive Technology
(OAT) engine coolant (antifreeze), may re-
sult in engine damage and may decrease
corrosion protection. Organic Additive
Technology (OAT) engine coolant is differ-
ent and should not be mixed with Hybrid
Organic Additive Technology (HOAT) en-
gine coolant (antifreeze) or any “globally
compatible” coolant (antifreeze). If a non-
OAT engine coolant (antifreeze) is intro-
duced into the cooling system in an emer-
gency, the cooling system will need to be
drained, flushed, and refilled with fresh
OAT coolant (conforming to MS.90032), by
an authorized dealer as soon as possible.
(Continued)
CAUTION!
(Continued)
• Do not use water alone or alcohol-based
engine coolant (antifreeze) products. Do
not use additional rust inhibitors or antirust
products, as they may not be compatible
with the radiator engine coolant and may
plug the radiator.
• This vehicle has not been designed for use
with propylene glycol-based engine cool-
ant (antifreeze). Use of propylene glycol-
based engine coolant (antifreeze) is not
recommended.
175
To Next Page
Loading...
