Dodge Viper 2017 - Cybersecurity

WARNING! (Continued)
controlled environment and within the limits
of the law. The capabilities of the vehicle as
measured by the performance pages must
never be exploited in a reckless or dangerous
manner, which can jeopardize the user’s
safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent acci-
dents.
Push and release the up or down arrow button
until the SRT icon is highlighted. Push and
release the right arrow button, and 0–60 MPH
Duration will be displayed. Push and release the
left and right arrow button to scroll through the
following information sub-menus:
0–60 Time
Push and release the left or right arrow button
until the last 0–60 MPH information is displayed.
Braking Distance
Push and release the left or right arrow button
until the last Braking Distance information is
displayed.
1/4 Mile Elapsed Time
Push and release the left or right arrow button
until the last 1/4 Mile Top Speed & Duration
information is displayed.
1/8 Mile Elapsed Time
Push and release the left or right arrow button
until the last 1/8 Mile Top Speed & Duration
information is displayed.
G-Force Instant
Push and release the left or right arrow button
until the Current G-Forces are displayed.
G-Force Peak
Push and release the left or right arrow button
until the Peak G-Forces are displayed.
Diagnostic Codes
Push and release the up or down
arrow button until the Diagnostic
Code icon is highlighted. Push and
release the right arrow button to dis-
play any present diagnostic trouble
codes along with a brief definition.
Vehicle Hibernation
To Activate Hibernation Mode
1. Cycle the ignition switch to
(ACC).
2. Select Hibernation mode within the instru-
ment cluster display.
3. Push the right arrow button on the steering
wheel controls for one second. Vehicle will
countdown from ten seconds and enter Hi-
bernation Mode.
NOTE:
You may push the right arrow button on the
steering wheel controls during the count-
down to abort Hibernation Mode.
To Deactivate Hibernation Mode
1. Push the key fob unlock button to unlock the
vehicle.
2. Push the Keyless Push Button Ignition to the
ON/RUN position.
CYBERSECURITY
Your vehicle may be a connected vehicle and
may be equipped with both wired and wireless
networks. These networks allow your vehicle to
send and receive information. This information
allows systems and features in your vehicle to
function properly.
Your vehicle may be equipped with certain se-
curity features to reduce the risk of unauthorized
and unlawful access to vehicle systems and
wireless communications. Vehicle software
technology continues to evolve over time and
FCA US LLC, working with its suppliers, evalu-
ates and takes appropriate steps as needed.
Similar to a computer or other devices, your
vehicle may require software updates to im-
82