Dodge Viper 2017 - Page 97

CAUTION!
Check engine oil level at every fuel fill-up.
Running an engine with a low oil level can
cause severe engine damage. Engine oil
level must be maintained within the safe zone
on the engine oil dipstick or severe engine
damage may occur. Refer to the “Mainte-
nance Schedule” for further information.
The SRT Performance Pages include the follow-
ing:
• Home
• Timers
• G-Force
• Gauges 1
• Gauges 2
• Engine
• Options
The following describes each feature and its
operation:
Timers
When the Timers Page is selected you will be
able to select from following “Tickets”:
• Current
Pressing the “Current” button displays a “real
time” summary of performance timers.
• Last
Pressing the “Last” button displays the last
recorded run of performance timers.
• Best
Pressing the “Best” button displays the best
recorded run of performance timers, except for
braking data.
• Save
Pressing the “Save” button will let you save the
last run. Any saved run over 10, will overwrite
the last saved run for Uconnect System storage.
The operation of the Save feature is listed
below:
With a USB jump drive installed, press the
“USB” button to save runs to the jump drive.
With an SD Card installed, press the “SD Card”
to save runs to the SD Card.
Press the “Uconnect” button to save the runs to
the Owner web page.
Press the “Cancel” button to view the last timer
“Ticket.”
The “Tickets” contain the timers listed below:
• 0-60 MPH (0-100 km/h)
Displays the time it takes for the vehicle to go
from 0 to 60 mph (0 to 100 km/h).
• ⅛ Mile (200 meter)
Displays the time it takes for the vehicle to go an
⅛ Mile (200 meters).
• ⅛ Mile (200 meter) mph
Displays the speed it takes for the vehicle to go
an ⅛ Mile (200 meters).
• ¼ mile (400 meter)
Displays the time it takes for the vehicle to go an
¼ mile (400 meters).
• ¼ mile (400 meter) mph
Displays the speed it takes for the vehicle to go
an ¼ mile (400 meters).
Brake Distance
• Displays the distance it takes the vehicle to
make a full stop. Contains current and last
data for distance and start – from speed.
NOTE:
The distance measurement will be aborted if
the brake pedal is released before the ve-
hicle comes to a complete stop.
Brake from mph
• Displays the speed the vehicle is traveling
when the brake pedal is depressed.
NOTE:
Brake distance and speed timers will only
display ⴖreadyⴖ when vehicle is traveling at
greater than 30 MPH (48 km/h).
94