10
Understanding Your Training System
1. How to Turn the 200C On/O
To activate the receiver/collar, place the red dot on the back of
the transmitter to the red dot on the receiver/collar. Hold the
two red dots together for a moment until the LED light on the
receiver/collar comes on.
To deactivate the unit, repeat the same procedure holding the
two red dots together momentarily. The LED light will turn red
for a brief moment indicating that the receiver/collar is now
shut off.
The transmitter does not have an on/off switch, and it will only
activate when buttons are pressed.
2. How the Transmitter Buttons Work
200C
The transmitter for the 200C single dog unit has three
buttons (one on the face of the transmitter, and two on the
left side).
Pager
Button
Nick
Button
Constant
Button
To Next Page
Loading...
