12
4. Receiver Fitting
Proper Fit
The receiver should be fitted so that the surgical stainless
steel contact points press firmly against the dog’s skin.
You should be able to fit two fingers underneath the
collar strap. The best location is on either side of the dog’s
windpipe.
Improper Fit
A loose fit can allow the receiver to move around on the
dog’s neck. When this happens, the contact points may
rub against the skin and cause irritation. If the receiver
is too loose, the contact will not be consistent and cause
the corrections to be inconsistent. Dogtra uses surgical
stainless steel contact points and anti-microbial plastic to
protect the dog’s skin.
Change the dial to select the number of the receiver that
you would like to control from the transmitter.
3. Using the Dog Selector Dial
The EDGE RT is expandable to a 3-dog system.
To Next Page
Loading...
