10 11
Understanding your training system
1. How to turn on/off the unit
2. How the buttons work
+RZWR¿WWKHFROODURQWKHGRJ
4. Finding the right stimulation level for my dog
5. To maximize the distance
6. Checking the status using LED indicator
7. Charging the battery
Understanding your training system
To activate the receiver/collar, place the red
dot on the back of the transmitter to the red
dot on the collar/receiver. Hold the two red
dots together for a moment until the LED
light on the receiver/collar comes on.
To deactivate the unit, repeat the same
procedure holding the two red dots together
momentarily. The LED light will turn
red for a brief moment indicating that the
collar/receiver is now shut off.
The transmitter does not have on/off
switch, and it will only activate when
buttons are pressed.
1. How to turn on/o the unit
1. How to turn on/off the unit
11
12
13
14
15
16
17
To Next Page
Loading...
