Dolphin DOLKWP300318 - Keypad Programming and Activation; Programming the Master Code; Programming the User Entry Code; Deleting User Entry Code

1. Press
2. Enter the “Master Code” (default is )
3. Press the button
4. Enter for change code
5. Enter for the number of user code (eg. “03” for the third user code, etc).
6. Enter the new “User Enter Code” (Must be 4 digits)
7. Press the button. The multi-color status LED flashes Green 3 times meaning
the code is accepted. If the multi-color status LED flashes 3 times Red, the
steps need to be repeated.
STEP 5: Programming the User Entry Code
1
1
*
*
432
0 1
1. Press
2. Enter the “Master Code” (default is )
3. Press the button
4. Enter for delete code
5. Enter for the number of user code (eg. “03” for the third user code, etc).
6. Press the button. The multi-color status LED flashes Green 3 times meaning
the code is accepted. If the multi-color status LED flashes 3 times Red, the
steps need to be repeated.
STEP 6: Deleting the programmed User Entry Code
1
2
*
*
432
0 1
1. Press
2. Enter your programmed usercode.
STEP 7: Activating the Keypad
1. Press
2. Enter the “Master Code” (default is )
3. Press the button
4. Enter for change code
5. Enter for “Master Code”
6. Enter the new “Master Code” (Must be 4 digits)
7. Press the button. The multi-color status LED flashes Green 3 times meaning
the code is accepted. If the multi-color status LED flashes 3 times Red, the
steps need to be repeated.
STEP 4: Programming the Master Code
1
1
*
*
*
432
0 0
NOTE: 3 beeps indicates a wrong code.
5-6 beeps indicates low battery.