Dolphin DOLKWP300318 User Manual

DOLKWP300318
Dual Frequency 300/318 MHz Keypad
v.2.22.17

Dolphin DOLKWP300318 Specifications

General

Brand	Dolphin
Model	DOLKWP300318
Category	Keypad
Language	English

Summary

Keypad Setup Procedures

Set Jumper S1 for Frequency

Configure the operating frequency using Jumper S1 based on receiver compatibility.

Set Jumper 4 on S2

Set Jumper 4 on S2 for 300 MHz (OFF) or 318 MHz (ON) operation.

Set DIP Switches to Match Receiver

Match keypad DIP switches to the receiver settings using ON/OFF positions.

Keypad Programming and Activation

Programming the Master Code

Procedure to program or change the master code for keypad access.

Programming the User Entry Code

Steps to program individual user entry codes for access.

Deleting User Entry Code

Instructions for removing existing user entry codes from the keypad.

Activating the Keypad

How to activate the keypad for use with a programmed user code.

DOLKWP300318 Operation Details

Return to Default Settings

Steps to reset the keypad to its factory default master code and settings.

Multi-color Status LED Indicators

Explanation of the multi-color LED indicators and their meanings.

RF Transmit Time Setting on S2

Configure the RF transmit time duration using DIP switch S2 settings.

Adding Relay Options

Relay Module and Power Supply Connection

Diagram and notes for connecting a relay module and 9-24 VDC power supply.

Warranty Information