Need help?Do you have a question about the Dolphin DOL1000-MF and is the answer not in the manual?
Terminals for power supply (V+/V-, 6VDC Battery, 6-24VAC/DC) and RF communication (RF1).
Terminals for output control: Normally Open (NO), Common (COM), and Normally Closed (NC).
Locates the master reset button and describes its function for code reset.
Guide to installing a dip switch module, including DIP switch functions and wireless mode.
Step-by-step instructions for preparing and installing a 433MHz module.
Procedures for adding new access codes and deleting existing ones.
Instructions for configuring the duration of the relay output.
Steps to change the master code and clear all other codes.
How to add one-time guest codes and toggle access codes for specific modes.
Detailed procedure for resetting the keypad and master code using the reset button.
Provides key specifications including IP rating, temperature, size, weight, and operating voltage.
To Next Page
General
