Dometic 3314080.015 WHITE

Need help?

Do you have a question about the Dometic 3314080.015 WHITE and is the answer not in the manual?

Summary

About Your New Thermostat

B. System Configuration & Initialization

Explains initial setup steps, including DIP switches and system reset for proper operation.

Programming & Operations

A. ON;OFF

B. Clock Setting

F. Mode Selection

G. Fan Speed

H. Temperature Set-Point

Mode Description

B. COOL - Cool Mode

Explains the operation of the COOL mode, including fan speeds and compressor cycling.

C. HP - Heat Pump Mode

Details the operation of the Heat Pump mode, including fan speeds and compressor cycling.

D. HS - Heat Strip Mode

Explains the operation of the Heat Strip mode, including fan speeds.

F. “FURN”; “AQUA - Furnace Or Aqua (Hydronic) Heating Mode

Details how to select and operate FURN/AQUA heating modes and temperature differentials.

G. AUTO - Auto Change Over Mode

Explains how the system automatically switches between cool and heat modes.

Special Features

B. Zone Control

C. Program “1” & “2”

Details how to set up two programmable operating programs with specific times and settings.

F. Auxiliary Heat (Heat Pump Models Only)

Describes the activation and operation of auxiliary heat for heat pump models.

G. Stage Select - Two Air Conditioner;Heat Pump Units (Select Models) On One Zone

Explains how to configure primary and secondary stages for dual AC/HP units in one zone.

H. Stage Select - Dual Compressor Air Conditioner;Heat Pump (Select Models)

Details the operation of dual compressor AC/HP units and secondary stage differentials.

I. Auto Generator Start (AGS)

K. Defrost Cycle (Heat Pump Models Only)

L. Compressor Time Delay

N. LCD Error Code

Lists and explains various error codes displayed on the LCD and their meanings.

System Reset Procedure

Maintenance

A. Air Filter

Service