Dometic CCC 2 User Manual

Comfort Control Center 2 Thermostat
User’s Guide
USA
SERVICE OFFICE
Dometic, LLC
2320 Industrial Parkway
Elkhart, IN 46516
574-294-2511
CANADA
Dometic, LLC
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
519-720-9578
For Service Center
Assistance Call:
800-544-4881
Dometic Comfort Control Center 2 Thermostat Quick Start-Up
The basic steps for operating your Air Conditioner, Heat Pump or Dehumidier (herein
after referred to as the “unit”), are described in this User’s Guide. For more detailed
information on modes of operation and special features refer to the Operating Instruc-
tions Manual.
Quick reference to control buttons
Press to display
inside temperature
Press to select
temperature format
Press to decrease
temperature or
humidity set-point
Press to increase temperature
or humidity set-point
Press to display
relative humidity set-
point (Select Models)
Press to select zone
Press to select
On and OFF
Press to select fan
speed
Press to set
clock
Press to
select mode
Press to select
program 1 or 2
REVISION
Form No. 3314150.016 10/11
(Replaces 3314150.000)
(French 3314170.014)
©2011 Dometic, LLC
LaGrange, IN 46761
3314150.016

Dometic CCC 2 Specifications

General

Brand	Dometic
Model	CCC 2
Category	Thermostat
Language	English

Summary

Dometic CCC 2 Thermostat User Guide

Quick Reference to Control Buttons

Visual guide to the Dometic CCC 2 thermostat's primary control buttons and their functions.

Thermostat Operation

Turning the Thermostat On

Steps to power on the Dometic CCC 2 thermostat when the backlight is off.

Selecting Operating Mode

How to cycle through and select available modes like COOL, HEAT PUMP, FAN, AUTO.

Zone Selection

Procedure for cycling through and programming different zones controlled by the thermostat.

Adjusting Temperature Set-Point

Using UP/DOWN buttons to set the desired room air temperature.

Advanced Controls and Settings

Fan Speed Selection

How to select fan speed options: AUTO, HI, MED, or LO.

Clock Setting Procedure

Steps to set the hour, minute, and AM/PM for the thermostat's clock.

Displaying Inside Temperature

How to view the current inside temperature instead of the set-point.

System Features and Error Codes

Special Features Overview

List of special features including Auto Fan, Stage Select, Programs, Auxiliary Heat, Load Shed, Auto Generator Start.

LCD Error Code Explanations

Detailed descriptions of error codes (E1-E9) and their causes for system faults.