Do you have a question about the Dometic 8700 Series and is the answer not in the manual?
Defines warning, caution, notice, and information symbols used throughout the manual.
Crucial safety guidelines and warnings for personnel performing the awning installation.
Critical safety warnings and preparation steps before starting the awning installation.
Details the comprehensive procedure for mounting the awning, including bracket installation and accessory fitting.
Instructions and visual guides for extending the awning into its operational positions.
Step-by-step instructions for safely retracting the awning.
This document is the Installation and Operating Manual for the Dometic 8700 Series Awnings. It provides comprehensive instructions for installing, using, and maintaining the awning, along with important safety information and technical specifications.
The Dometic 8700 Series Awning is designed to provide shade for recreational vehicles (RVs). Its primary function is to extend and retract, offering protection from the sun when the vehicle is stationary. The awning is intended for use only when the vehicle is not in motion. The manual details how to properly open and close the awning, including specific steps for different opening positions (A and B). It also covers the installation of an optional door roller kit, which is necessary if a squared corner entry door might contact the awning fabric.
The manual provides a table of technical specifications for two models: 878HT-WH/878HT-BK (Tall – Black or white) and 878HS-WH/878HS-BK (Standard - Black or white). For the 878HT-WH/878HT-BK (Tall) model:
For the 878HS-WH/878HS-BK (Standard) model:
The scope of delivery includes the fabric roller tube assembly (ordered separately) and hardware (ordered separately), which consists of hardware assemblies, a door roller kit, bottom mounting brackets, a pull rod, and fixing materials. The sail track is not supplied by Dometic and must be purchased and installed separately.
The awning can be used in two opening positions, A and B, as illustrated in the manual. The opening procedure involves several steps, including releasing preset tension, extending the arms, and securing the fabric. The manual emphasizes the importance of ensuring the awning is extended high enough before opening the entry door and that the lock lever is in the correct position to prevent damage. It also warns against over-extending the awning, which can lead to water trapping and fabric stretching. For closing the awning, users are instructed to ensure the lock is in the "roll-down" position before swinging the arms toward the vehicle and to not release the pull strap immediately after turning the lock, as the awning is under tension. The installation process requires careful attention to detail, including ensuring the awning rail is straight and parallel to the RV floor, and that back channels are installed on a flat, level surface. Sealant must be used to prevent moisture entry where fasteners penetrate the RV's roof and walls. It is recommended that two or three people install the awning due to its size and complexity.
The manual provides clear instructions for cleaning and maintenance to ensure the longevity of the awning. Key maintenance points include:
The manual also includes important safety instructions for installation, warning against fire/electrocution hazards, impact/crush hazards, and impact/pinch hazards. It advises that individuals without sufficient technical knowledge should have a specialist fit the awning. The warranty information states that the product warranty is 1 year and requires a copy of the receipt and a description of the fault for any claims. Disposal instructions recommend placing packaging material in appropriate recycling bins and consulting local recycling centers for product disposal.
| Brand | Dometic |
|---|---|
| Model | 8700 Series |
| Category | Accessories |
| Language | English |











