Dometic CDF 18 User Manual

EN
Operation CoolFreeze
16
7.6 Setting the temperature
CDF26
➤ Press the “SET” button once.
➤ Use the “+” and “–” buttons to set the cooling temperature.
✓ The set cooling temperature then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
CDF36, CDF46
➤ Press the “SET” button once.
➤ Use the “ADJUST” button to set the cooling temperature.
✓ The set cooling temperature then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
7.7 Selecting the temperature unit
CDF26
You can switch the temperature display between Celsius and Fahrenheit. To do this,
proceed as follows:
➤ Switch on the cooler.
➤ Press the “SET” button twice.
➤ Use the “+” and “–” buttons to set the cooling temperature.
✓ The set temperature unit then appears in the display for a few seconds. The dis-
play flashes several times before it returns to the current temperature.
CDF36, CDF46
You can switch the temperature display between Celsius and Fahrenheit. To do this,
proceed as follows:
➤ Switch on the cooler.
➤ Press the “SET” button twice.
➤ Use the “ADJUST” button to set the Celsius or Fahrenheit temperature unit.
CDF18-26-36-46--O-16s.book Seite 16 Montag, 7. November 2016 2:13 14

Dometic CDF 18 Specifications

General

Capacity	18 liters
Power Source	12/24V DC
Weight	11.5 kg
Rated Input Power (DC)	35 W
Refrigerant, Type	R134a
GWP	1430
Energy Consumption 24h (DC at 32°C)	0.65 kWh/24h
Insulation Type	PU
Voltage	12/24V DC
Power Consumption	35 W
Temperature Range	+10°C to -18°C