Dometic CDF18 - Setting the Temperature

EN
Operation CoolFreeze
16
CDF18: Switching off the cooler
➤ Empty the cooler.
➤ To Switch the cooler off: Slide the sliding switch “BATTERY MONITOR” to “0”.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
CDF26, CDF36, CDF46: Switching off the cooler
➤ Empty the cooler.
➤ Switch the cooler off.
➤ Unplug the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the lid slightly open. This prevents build-up of odours.
7.6 Setting the temperature
CDF26
➤ Press the “SET” button once.
➤ Use the “+” and “–” buttons to set the cooling temperature.
✓ The set cooling temperature then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
CDF36, CDF46
➤ Press the “SET” button once.
➤ Use the “ADJUST” button to set the cooling temperature.
✓ The set cooling temperature then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
CDF18-26-36-46_OPM_EMEA16.book Seite 16 Donnerstag, 27. Juni 2019 3:26 15