Operation CFF12, CFF18, CFF20, CFF35, CFF45, CFF70DZ
20
5Operation
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the cooling device
as often and for as long as necessary. Store the foodstuff in such a way that the air
can still circulate well.
• Adjust the temperature to the quantity and type of the foodstuff.
• Foodstuff can easily absorb or release odor or taste. Always store foodstuff
covered or in closed containers/bottles.
5.1 Before initial use
I
Mounting the handles (CFF20, CFF35, CFF45, CFF70DZ only) (fig. 5,
page 6)
The handles are enclosed unassembled. If you wish to attach the handles, proceed
as follows:
1. Assemble a handle by putting two holders (1) and a handle (2) together.
2. Fasten the holders with the enclosed screws in the holes provided.
Reversing the lid opening
➤ CFF70DZ: To reverse the lid opening, proceed as shown (fig. 6, page 7).
Opening or removing the lid (fig. 7, page 8)
➤ To open the lid, unlatch (A).
CFF35, CFF45: The lid can be opened from either side.
➤ CFF35, CFF45: To remove the lid, unlatch both sides at the same time (B).
CFF12, CFF 18, CFF20, CFF70DZ: To remove the lid, push the lid beyond the
lid stop position (B).
Lid stop position (fig. 8, page 9)
The lid has a built-in stop position (A). Do not force the lid past the built-in stop (B).
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter “Cleaning and maintenance” on page 29).
To Next Page
Loading...
