CFF20, CFF35, CFF45, CFF70DZ Operation
23
6.7 Switching a compartment off or on (CFF70DZ)
If only one compartment is required, the other compartment can be switched off to
save energy.
Switching off a compartment
If the display of the compartment shows a temperature, you can switch off the
compartment as follows:
➤ Press the “SET” button (fig. 3 5, page 11):
– Once for the large compartment
– Twice for the small compartment
✓ The display of the respective compartment blinks.
➤ Press the “ON/OFF” button (fig. 3 1, page 11).
✓ “OFF” flashes for five seconds on the display of the respective cooling
compartment, then “OFF” is displayed.
Switching on a compartment
If the display of the compartment shows “OFF”, you can switch on the compartment
as follows:
➤ Press the “SET” button (fig. 3 5, page 11):
– Once for the large compartment
– Twice for the small compartment
✓ The display of the respective compartment blinks.
➤ Press the “ON/OFF” button (fig. 3 1, page 11).
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed.
DometicCFF20-35-45-75DZ_OPM_4445103133_APAC(en)_202x-xx-xx.book Seite 23 Dienstag, 20. Oktober 2020 4:16 16