Operation CFX3
26
• On a regular basis, make sure the lid seal still fits properly.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessarily low temperatures.
7.3 Reversing the lid opening direction
CFX3 55IM, CFX3 100
➤ Proceed as shown (fig. 5, page 5).
CFX3 75DZ, CFX3 95DZ
➤ Proceed as shown (fig. 6, page 6).
7.4 Connecting the cooler
!
!
A
Connecting to a battery
➤ Proceed as shown (fig. 7, page 7).
Connecting to the Portable Battery Pack PLB40 or the Hardwiring Kit
HWK-DC (accessories)
➤ Proceed as shown (fig. 8, page 7).
WARNING! Fire hazard
The DC plug housing gets hot when operating in hot weather for
extended periods. Allow cooling off before disconnecting the DC plug.
WARNING! Fire hazard
Do not connect more than one power source to the product at any given
time. Electrical system damage can occur and may result in a fire.
NOTICE! Damage hazard
• For protection of the device the DC cable supplied includes a fuse
inside the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
• Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
To Next Page
Loading...
