CFX3 Operation
33
2. If necessary, place them in another cooling device to keep them cool.
3. Switch off the device.
4. Leave the lid open.
5. Wipe off the defrosted water.
7.22 Replacing the AC fuse
D
1. Disconnect the power supply to the device.
2. Pull out the connection cable.
3. Pry out the fuse insert (fig. 4 4, page 4) with a screwdriver.
4. Replace the defective glass fuse with a new one of the same type and rating
(Fast Acting, 4 A, 250 V).
5. Press the fuse insert back into the housing.
6. Reconnect the power supply to the device.
7.23 Replacing the DC fuse
1. Pry out the fuse cover (fig. 4 3, page 4) with a screwdriver.
2. Reverse the fuse cover and use hook to remove the defective blade fuse.
3. Push in a new fuse of the same type and rating.
– CFX3 25, CFX3 35, CFX3 45, CFX3 55IM, CFX3 75DZ: 10 A
– CFX3 95DZ, CFX3 100: 15 A
4. Re-fit the fuse cover.
7.24 Replacing the DC plug fuse
1. Replace the defective fuse with a new fuse of the same type and rating.
– CFX3 25, CFX3 35, CFX3 45, CFX3 55IM, CFX3 75DZ: 10 A
– CFX3 95DZ, CFX3 100: 15 A
2. Proceed as shown (fig. r, page 16).
DANGER! Electrocution hazard
Disconnect the power supply and the connection cable before you
replace the device fuse.
To Next Page
Loading...
