Operation CFX
14
7.2 Saving energy
• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
• On a regular basis, make sure the lid seal still fits properly.
7.3 Connecting the cooling box
Connecting to a battery (Vehicle or boat)
The cooling box can be operated with 12 V
g or 24 Vg.
A
For safety reasons the cooling box is equipped with an electronic system to prevent
polarity reversal. This protects the cooling box against short-circuiting when con-
necting to a battery.
Using the fused DC plug
A
1. Plug the DC connection cable (fig. 1 2, page 3) into the DC voltage inlet of the
cooling box (fig. 4 5, page 4).
2. Connect the connection cable to the DC power outlet.
NOTICE! Damage hazard
Disconnect the cooling box and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
NOTICE! Damage hazard
For protection of the device the DC cable supplied includes a fuse inside
the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
DometicCFX28-CFX50_OPM_4445103579_EMEA16_202x-xx-xx.book Seite 14 Dienstag, 28. September 2021 4:09 16
To Next Page
Loading...
