CFX75DZW, CFX95DZW Operation
25
7.14 Replacing the AC fuse
D
➤ Disconnect the power supply to the device.
➤ Pull off the connection cable.
➤ Pry out the fuse insert (fig. 4 2, page 12) with a screwdriver.
➤ Replace the defective glass fuse with a new one that has the same type and rating
(4A 250V).
➤ Press the fuse insert back into the housing.
➤ Reconnect the power supply to the device.
7.15 Replacing the DC plug fuse
➤ Unscrew the contact pin housing (3) from the plug (1).
➤ Replace the defective fuse (2) with a new fuse of the same type and rating (3AG,
Fast Acting, 10 A).
➤ Re-assemble the plug in reverse order.
DANGER! Danger of electrocution!
Disconnect the power supply and the connection cable before you
replace the device fuse.
CFX75_95DZW--O-AU.book Seite 25 Dienstag, 5. September 2017 2:08 14
To Next Page
Loading...
