Operation CFX75DZW, CFX95DZW
26
7.16 Replacing the light PCB
➤ Disconnect the power supply to the device.
➤ Pry out the transparent cover with a screwdriver (A).
➤ Unscrew the PCB mounting screws (B).
➤ Pull out the plug from the PCB (C).
➤ Replace the defective light PCB with a new one.
➤ Fit the new PCB using reverse of removal instructions.
➤ Press the transparent cover back into the housing.
➤ Reconnect the power supply to the device.
CFX75_95DZW--O-AU.book Seite 26 Dienstag, 5. September 2017 2:08 14
To Next Page
Loading...
