Installation D18B, D46B
20
Control elements
6 Installation
6.1 Selecting the installation location
Observe the following, when selecting the installation location:
• The ground must be level and sufficiently stable to support the wine cooler at full
capacity.
• The wine cooler must be positioned so that the plug is accessible.
• Note the information on the electrical connection, see chapter “Connecting the
wine cooler” on page 21.
➤ Remove all the inner and outer packaging material before setting up.
Nr. in
fig. 2,
page 3
Symbol Description
1 On/off button
2 Increases the set temperature by 1 °C or 1 °F for top zone
3 Decreases the set temperature by 1 °C or 1 °F for top zone
4 Temperature display (top zone)
5 Temperature display (bottom or right zone)
6 Increases the set temperature by 1 °C or 1 °F for bottom zone
7 Decreases the set temperature by 1 °C or 1 °F for bottom zone
8 Switches the interior LED lamp on or off
To Next Page
Loading...
