General safety instructions DC-Kit2
10
• Children must be supervised to ensure that they do not play with the
device.
• Maintenance and repair work may only be carried out by qualified
personnel who are familiar with the risks involved and the relevant
regulations.
2.2 Safety when installing and repairing
!
WARNING!
• Installing and repairing the device may only be performed by qualified
personnel who are familiar with the risks as well as the guidelines and
safety precautions to be applied.
2.3 Safe operation
!
• Only operate the system if you are certain that all the housings and
cables are not damaged.
• The 12 V connection cables are designed for high levels of current. Do
not make any changes to the cable. If necessary, get a specialist to do
this for you.
• Make sure the air inlets and outlets of the device are not covered.
• Ensure good ventilation. The inverter produces dissipated heat which
has to be diverted.
• Always disconnect the power supply when working on the device.
WARNING!
Note the following basic safety information when using electrical
devices to protect against:
• Electric shock
• Fire hazards
• Injury
DC-Kit2--IO-16s.book Seite 10 Dienstag, 21. März 2017 2:15 14
To Next Page
Loading...
