EasyManua.ls Logo

Dometic DTG User Manual

Dometic DTG
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CLIMATE CONTROL
MARINE SELF-CONTAINED
DCU, DLU, DTG, ECD, TX
EN
Self-Contained Air Conditioning System
Installation manual.........................................................3
Form No. 339708 Dometic Corporation
Question and Answer IconNeed help?

Do you have a question about the Dometic DTG and is the answer not in the manual?

Dometic DTG Specifications

General IconGeneral
BrandDometic
ModelDTG
CategoryAir Conditioner
LanguageEnglish

Summary

Important notes

Related documents

Explanation of symbols and safety instructions

Recognize safety information

A signal word will identify safety messages and property damage messages, and also will indicate the degree or level of hazard seriousness.

Understand signal words

A signal word will identify safety messages and property damage messages, and also will indicate the degree or level of hazard seriousness.

Intended use

General information

Component locations

Air Conditioning System Component Identification - Shows components and their locations within the system.

Specifications

Pre-installation

Determining the installation location

This section explains how to prepare the air conditioner for installation, focusing on location.

Rotating the blower

This section explains how to rotate the blower for each unit type to allow the most direct airflow discharge.

Placing the air filters

Air filters remove airborne particles from the cabin air and keep the evaporator coil clean.

Placing the grilles and transition boxes

Considerations for placing supply air and return air grilles and transition boxes for optimal airflow.

Installation

Installing the mounting brackets and condensate drain

Instructions for installing mounting brackets and the condensate drain, with a notice to prevent drain pan cracking.

Installing the ducting

Observe conditions for installing ducting, ensuring it is appropriately sized, run straight, and fastened securely.

Installing the seawater system

Considerations for setting up the seawater system, including strainer placement, hose clamping, and thru-hull fittings.

Making electrical connections

Instructions for making electrical connections, emphasizing safety and proper grounding for the system.

Disposal

Warranty

Related product manuals