EasyManua.ls Logo

Dometic DX Remote & Self-Contained A/C User Manual

Dometic DX Remote & Self-Contained A/C
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DX Remote & Self-Contained A/C v
INSTALLATION • OPERATION
Direct Expansion Systems
Revised: 20170710
L-2086
v
English

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Dometic DX Remote & Self-Contained A/C and is the answer not in the manual?

Dometic DX Remote & Self-Contained A/C Specifications

General IconGeneral
BrandDometic
ModelDX Remote & Self-Contained A/C
CategoryAir Conditioner
LanguageEnglish

Summary

DX Remote & Self-Contained A/C Systems • Introduction

Air Conditioning Basics

Explains the fundamental heat transfer principle of air conditioners.

System Controls

Details the available control types, including electromechanical and SMX microprocessor systems.

Seawater System

Describes the components of the seawater cooling system and their function.

DX Remote & Self-Contained A/C Systems • Installation

Installation Procedures

Outlines the steps for installing both self-contained and remote systems.

Electrical System

Covers power supply requirements, voltage, and frequency considerations for system installation.

Installing The Self-Contained A/C Unit

Provides guidance on selecting a site and mounting self-contained units.

Installing The Condensing Unit

Details site selection and mounting procedures for remote condensing units.

Installing the Seawater Cooling System

Explains the installation of the seawater system components.

Installing the Control Unit

Guides the installation of control units like SMX and rotary knob switch assemblies.

Final Inspection

A checklist for inspecting all system components before energizing.

DX Remote & Self-Contained A/C Systems • Operation

Operating Instructions - Rotary Controls

How to operate SA & SSA models using rotary controls.

Operation Instructions - SMX Controls

Basic operation for SMX II and SMX Net control systems.

Cool Mode

Instructions for operating the system in cooling mode.

Heat Mode

Instructions for operating the system in heating mode.

Automatic Changeover

How to use the automatic changeover feature between cooling and heating.

Owner Maintenance & Troubleshooting

Condensate Drains & Air Filters

Checking and cleaning condensate drains and air filters.

Seawater Pump & Winterizing

Guidance on inspecting the seawater pump and winterizing the system.

Unit Will Not Operate

Solutions for when the unit fails to turn on.

Air From Unit Does Not Feel Cool

Troubleshooting steps for inadequate cooling.

Compressor Cycles On and Off

Diagnosing and resolving issues with the compressor cycling.

Related product manuals