Dometic DOTR12CWIV - Wall-Vented Installation

- 11 -
WALL-VENTED INSTALLATION:
1. Remove one motor mounting screw and two
mount-all mounting screws. Take off the mount-all
from the oven. See Figure 15.
2. Carefully lift the vent motor of the microwave oven.
3. Rotate the vent motor 180˚ so the exhaust ports
face the back of the cabinet. See Figure 16.
4. Place the motor back into microwave oven.
5. Reattach mount-all to microwave oven. Attach
motor mounting screw and then two mount-all
mount screws. See Figure 15.
Figure 14
Figure 15
Figure 16
mount-all
Knockouts
motor
mounting screw
Vent motor
Use side cutters or tin snips.
motor wire
exhaust ports