What does P2 mean on my Dometic Air Conditioner display?
The error code P2 on your Dometic Air Conditioner display indicates a unit AC over-current protection issue. Contact an authorized service agent or Dometic for assistance.
What does P1 mean on my Dometic FJX4233M Air Conditioner display?
The error code P1 on your Dometic Air Conditioner display indicates under voltage protection. Contact an authorized service agent or Dometic for assistance.
Why is my Dometic FJX4233M not cooling well?
Your Dometic Air Conditioner might not be cooling well due to several reasons: * The unit might not be set to cooling; ensure it is. * The ambient temperature might be too high (above 52 °C) or too low (below 16 °C), as the unit is designed to cool only within this range. * The set temperature could be higher than the room temperature; select a lower temperature. * A temperature sensor, the evaporator fan, or the condenser fan might be defective. In this case, contact an authorized service agent or Dometic.
What causes low air output from my Dometic FJX4233M?
Low air output from your Dometic Air Conditioner can be caused by: * Blocked air intake openings. Clear any leaves or dirt from the ventilation grilles. * A defective fan. Contact an authorized service agent or Dometic for assistance.
Why does water enter the vehicle from my Dometic FJX4233M?
Water may enter the vehicle from your Dometic Air Conditioner if: * The condensation water drainage openings are clogged. To resolve this, clean the water drainage openings. * The seals are damaged. If this is the case, contact an authorized service agent or Dometic.
What to do if my Dometic FJX4233M does not switch off?
If your Dometic Air Conditioner does not switch off, it could be due to a defective temperature sensor or the electrical fuse of the power supply is too low. Contact an authorized service agent or Dometic.
What to do if my Dometic FJX4233M Air Conditioner does not switch on?
If your Dometic Air Conditioner does not switch on, begin by checking the power supply to ensure it's properly connected. If the voltage is too low (below 200 V), or if the voltage converter is defective, or if the electrical fuse of the power supply is too low, contact an authorized service agent or Dometic. Also, a defective temperature sensor may be the reason.
Why is my Dometic Air Conditioner not heating well?
If your Dometic Air Conditioner (models with heating mode) isn't heating well, it could be due to several reasons. First, ensure the unit is set to heating mode. The ambient temperature may be too low (below -2 °C), as the air conditioner is designed for temperatures above this. Also, check that the set temperature is higher than the room temperature; if not, increase it. If these aren't the cause, a temperature sensor or the evaporator fan might be defective, requiring assistance from an authorized service agent or Dometic.
What to do if my Dometic FJX4233M Air Conditioner is not switching off?
If your Dometic Air Conditioner is not switching off, it may be due to a defective temperature sensor or an electrical fuse of the power supply that is too low. In either case, contact an authorized service agent or Dometic.
What to do if my Dometic FJX4233M Air Conditioner (FreshJet FJX4233EEH/ FJX4333E(EH)/FJX7333IHP/ FJX7337IHP/FJX7457IHP) is not heating well?
If your Dometic FreshJet Air Conditioner is not heating well, it could be due to a few reasons: * The unit might not be set to heating; ensure it is. * The ambient temperature might be too low (below ? 2 °C), as the unit is designed for ambient temperatures above ? 2 °C. * The set temperature could be lower than the room temperature; select a higher temperature. * A temperature sensor or the evaporator fan might be defective. In this case, contact an authorized service agent or Dometic.
General| Brand | Dometic |
|---|---|
| Model | FJX4233M |
| Category | Air Conditioner |
| Language | English |
To Next Page
