Using the Heki2 Heki2
10
8.3 Opening in the continuous ventilation position
(fig. d)
➤ Press the latches on both rotary bolts and turn them 90° (A).
➤ Push the glass dome upwards with both hands approx. 2 cm on both rotary
bolts.
➤ Turn the rotary bolt into the position provided for this (B).
To close it, follow the instructions in the reverse order.
8.4 Closing the roller blind (fig. e)
A
➤ Take hold of the recessed grip on the rod and pull it towards the rod on the other
side with the pivot until they both click into one another.
➤ Select the required position by moving the two latched-roller blinds at the same
time
8.5 Opening the roller blind (fig. f)
➤ Pull the roller blind so that the blind with the recessed grip is completely
extended.
➤ Separate the roller blinds by pressing the pivot.
➤ Guide the roller blind back using the recessed grip.
Do not let the roller blind spring back.
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of the
way. Open the glass dome into the “continuous ventilation” position.
Heki2-IO-16s.book Seite 10 Montag, 28. November 2016 8:56 20
To Next Page
Loading...
